Cargo Air Shower tunnel Cargo Pass through box with PVC fast
1.Outside Size:2300(w)*2000(d)*2330 (h)mm
Inside size: 1800(w)*2000(d)*1980(h)mm
2.Material:Powder coating steel frame, 304 SUS inner 1.2mm
3.Fan: Special fan for air shower: 4 sets
G4 Pre filter and H14 Hepa filters: 4 sets
4.Nozzle number:36pcs Multi-angle adjustable all stainless steel
nozzles, double side spray;Surface wind speed is greater than
5,Door:High quality PVC Fast roller shutter door.
6. product work process: Fully automatic infrared induction
blowing, imported AUTOnise infrared sensor, Chint relay, one-way
air shower, enter from non-clean area, after the door is closed,
the infrared sensor will be blown, and the double door will
automatically lock when blowing. After the entry is locked, it will
not be blown through the air shower when it goes out of the clean
area to save energy.
7. Circuit control: advanced high-tech integrated circuit board,
LED display blowing time, time relay 0~99 seconds adjustable,
infrared automatic sensor, induction automatic blowing, touch micro
switch, and installation of humanized intelligent voice prompt
2. Cargo pass box adhibition
1)The PVC rolling door fast shutter door air shower is a cargo
purification device that is used when an operator enters a clean
room. It uses a high-speed, clean air stream to blow away dirt that
has entered the body of the person. The nozzles can be adjusted to
effectively remove dust from the human body and prevent outside
contamination from entering the clean area. It can also be applied
to the blowing of large items.
2)The wind/cargo shower is the necessary passage for people/goods
entering and exiting the clean room and at the same time serves as
a closed clean room for the airlock.
3)In order to reduce the large amount of dust particles brought in
by people/goods, the clean air filtered by the HEPA filter is
sprayed from various directions to the person/goods by the
rotatable nozzle, effectively and rapidly removing the dust
particles and the cleaned dust particles. The filter is then
re-circulated to the air shower area after filtering by the primary
and high-efficiency filters.
4)In order to achieve the best effect of blowing, the wind speed of
the nozzle outlet designed by the wind/launching chamber can reach
25m/s or more, and the wind speed blowing to the human body is
18m/s, and the initial air shower time is set to 15 seconds.
5)Air showers provide a modular assembly method that can be
assembled into air shower sizes of various lengths as required.
3. Company information
HongKong Yaning Purification Technology Co., Ltd. is located in
Humen town,Dongguan city,Guangdong province,China.YANING has been
concentrating on the R&D, design, production, sale and
installation of purification equipment. the company is committed to
the purification industry for more than ten years, the South China
purification technology industry's most Powerful enterprises. The
main products used in health care, electronics technology,
bio-medicine, food, precision instruments, aerospace,Autombile
manufacturing, and many other areas.
4.An production site of our fast shutter door cargo air shower